ET16 Firmware Updating Instruction
1, Download the update package here.
2, Unzip the update package, you will find two file in the folder: UPDATE.BRN (firmware update file) and CzurScanner_setup_full_V16.2.0728.1.exe (software suite).
3, Connect ET16 to PC via USB cable while the scanner is turned off.(No need to open the Czur Scanner Software Suite)
4, While keep holding the“+”button on ET16 base, turn on ET16 until the PC detected the scanner as an USB disk device, then release the “+”button.
5, Access the scanner (as an USB disk device) from your PC, paste the firmware update file UPDATE.BRN to the root directory.(Do not change any of the files.)
6, Close the USB disk window, pull out USB cable.
7, The scanner will start the firmware update automatically, the middle red LED light on the head of ET16 will flash for about 1 minute, don’t turn off the scanner or do any other operations until the red light extinguish.
8, Restart ET16. Hardware upgrading finished.